A bifacial panel is not automatically eligible or ineligible for PM Surya Ghar subsidy: its DCR status, exact ALMM listing, approved vendor, installation and commissioning records decide the outcome. You will be able to check a proposed 530 W, 535 W or 540 W module, estimate the panel count for your sanctioned capacity and separate the subsidy from the full installed cost.
Key takeaways
- Bifacial technology alone does not determine PM Surya Ghar eligibility.
- Verify DCR status and the exact ALMM-listed model before approval.
- Match 530 W, 535 W or 540 W modules to the sanctioned capacity.
- Compare bifacial panel cost with added mounting, spacing and installation requirements.
Bifacial technology does not decide PM Surya Ghar eligibility
Yes. A bifacial module can be installed in a subsidised PM Surya Ghar rooftop system. Its rear-side generation, Mono PERC or TOPCon cell design, and wattage do not decide eligibility.
For a proposed bifacial solar panels PM Surya Ghar Yojana installation, verify the exact equipment and scheme records:
- Manufacturer name, exact model number and rated power
- DCR evidence confirming that both the module and solar cells are domestically manufactured
- Current MNRE Approved List of Models and Manufacturers (ALMM) listing
- Applicable BIS or test-compliance documents, warranty terms and inverter details
- DISCOM or portal commissioning record after installation
An imported module, or an Indian-assembled module containing imported cells, should not be treated as DCR-compliant. A quotation that says only “PM Surya Ghar Yojana solar panels” proves nothing about the specific module.
A 530 W, 535 W or 540 W label describes nameplate output, not residential CFA eligibility. Treat each rating as eligible only after checking its exact model against the DCR evidence, ALMM listing and installation conditions.
If those records are missing, pause approval rather than relying on the panel’s bifacial description or a vendor’s verbal assurance.
Check DCR status and the exact ALMM model before approval
A quotation that says only “PM Surya Ghar Yojana solar panels” does not prove CFA eligibility. Ask for documents tied to the exact bifacial model, wattage and manufacturer—not merely a brand name or a statement that the factory is in India.
| Document | What must match | Why it matters |
|---|---|---|
| DCR evidence | Module and solar cells are domestically manufactured; model number and rated power match the supplied panel | An Indian-assembled module with imported cells does not establish DCR compliance |
| MNRE ALMM record | Exact manufacturer, series, model number and rated configuration appear on the current Approved List of Models and Manufacturers | A manufacturer’s listing does not automatically cover every bifacial variant or 530 W, 535 W or 540 W version |
| Technical and supply file | Manufacturer datasheet, applicable BIS registration or test-compliance document, serial-number list, product warranty and installation warranty | These documents connect the approved model to the panels installed at your home |
Before approval, compare the module label and invoice against the submitted file. Check that the serial numbers, rated power, cell technology and model suffix are identical; “Mono PERC” describes cell architecture, not DCR status or bifacial construction.
Also request the inverter make and model, the installation photograph or completion evidence, and the DISCOM or national portal commissioning record. The CFA depends on the approved installation, not just the panel’s advertised rear-side gain. Keep the DCR and ALMM documents with your application for PM Surya Ghar Yojana solar panels.
Match 530 W, 535 W or 540 W panels to the sanctioned capacity
A 1 kW sanctioned system needs two panels rated 530 W, 535 W or 540 W. One panel cannot reach 1 kW, while two create a DC nameplate total above the sanctioned capacity.
| Sanctioned capacity | 530 W panels | 535 W panels | 540 W panels |
|---|---|---|---|
| 1 kW | 2 panels, 1.06 kWp | 2 panels, 1.07 kWp | 2 panels, 1.08 kWp |
| 2 kW | 4 panels, 2.12 kWp | 4 panels, 2.14 kWp | 4 panels, 2.16 kWp |
| 3 kW | 6 panels, 3.18 kWp | 6 panels, 3.21 kWp | 6 panels, 3.24 kWp |
- Treat these as minimum panel counts, not automatic approval. Check the panel voltage, short-circuit current, dimensions and string limits against the inverter’s MPPT range and maximum DC input.
- Ask for the exact model’s DCR evidence and ALMM listing. A 530 watt bifacial mono perc panel and a 540 watt bifacial mono perc panel do not qualify from their wattage or rear-side generation alone.
- Keep the sanctioned system capacity, inverter’s approved AC capacity and application documents consistent. Replacing an approved module with a higher-rated model can require revised documentation.
- Do not expect the excess DC nameplate to increase CFA. Six 530 W modules still support an approximately 3 kW CFA when the eligible sanctioned system is 3 kW; subsidy is not recalculated from 3.18 kWp or bifacial output.
Separate the CFA from bifacial solar panel cost and installation charges
A 530-watt bifacial Mono PERC panel does not receive a larger CFA because it produces more nameplate power. PM Surya Ghar CFA is calculated against the eligible, sanctioned residential system capacity and applicable benchmark limits after approved installation and commissioning, not against your supplier’s full invoice.
Treat the subsidy as a contribution, not a refund of every quotation line. Compare the quotation this way:
| Item | What the CFA does | What remains your cost |
|---|---|---|
| Eligible rooftop system | Contributes toward the approved residential capacity under the scheme | Any amount above the eligible capacity or benchmark limit |
| Bifacial module | Accepts the module only when the exact model meets DCR, ALMM and other applicable compliance conditions | The bifacial solar panel cost, including any premium over a compliant conventional module |
| Installation and balance of system | Does not automatically reimburse every installer charge | Mounting structure, labour, wiring, protection devices, freight, taxes, civil work and other quoted extras |
Ask for separate prices for the module, inverter, structure, installation, net-metering work and taxes. A quote that simply deducts “PM Surya Ghar subsidy” hides whether you are paying for an ineligible upgrade.
A 540-watt bifacial Mono PERC panel still needs the same model-level proof; “Mono PERC” alone proves neither DCR status nor ALMM listing. Nature Tek Solar Pvt Ltd, or any installer, should show those documents alongside the portal commissioning record and state which charges remain payable after CFA.
A battery or backup feature also belongs in a separate line because standard grid-connected CFA does not turn every storage purchase into a subsidised item.
Related products
 | Solar Panels Solar Panel 535 Watt Bi-Facial Mono Perc(Pack of two) The 535 Watt Bi-Facial Mono PERC Solar Panel (Pack of Two) is a high-performance solar module designed for residential, commercial, and large-scale... View product → |
 | Solar Panels Solar Panel 535 Watt DCR Mono Perc(Pack of two) The 535 Watt DCR Mono PERC Solar Panel (Pack of Two) is a high-efficiency solar solution designed for residential, commercial, and government solar... View product → |
Decide whether bifacial output justifies the rooftop design
A compliant bifacial module is a sensible choice only when the roof can expose its rear side to useful reflected light at a lower annual cost per delivered kWh than a conventional module.
A close-mounted residential roof often provides little rear-side light. Tiles, parapets, nearby panels and the roof surface block reflection, so the bifacial label can add price without adding equivalent generation. Treating a 540 W bifacial panel as a simple higher-wattage replacement can also force a new layout, string design or inverter check.
Bifacial output earns consideration when your roof has these features:
- An elevated mounting structure that leaves clear space beneath each module
- A light-coloured or reflective roof surface rather than dark tiles or weathered concrete
- Few parapets, water tanks or nearby structures that shade the rear side
- Enough roof area for spacing that avoids row-to-row obstruction
- Structural capacity for the added mounting steel and wind loads
Compare the complete design, not the panel sticker. Ask for the estimated annual kWh, module and structure cost, inverter compatibility, extra spacing, and any revised approval documents. Then compare that figure with a DCR and ALMM-compliant conventional system of the same sanctioned capacity.
For bifacial solar panels PM Surya Ghar Yojana applications, subsidy compliance still depends on the eligible module and installation records. Choose bifacial technology when its measured design gain survives those added costs—not merely because 530 W, 535 W or 540 W appears on the datasheet.
Frequently asked questions
Do bifacial solar panels qualify under PM Surya Ghar Yojana?
Yes. Bifacial technology does not decide eligibility. The system must meet the scheme’s current equipment, documentation and approval requirements.
What should you verify before approving bifacial panels?
Check the module’s DCR status and the exact model’s listing under the Approved List of Models and Manufacturers, or ALMM.
Can 530 W, 535 W and 540 W bifacial panels be used?
They can be considered when their total capacity matches the sanctioned rooftop system capacity and the selected models meet scheme requirements.
Does the CFA cover the full bifacial solar panel cost?
No. Separate the Central Financial Assistance from panel, inverter, mounting structure, installation, approvals and other project charges.
When is a bifacial rooftop design worthwhile?
It is worthwhile when the roof allows rear-side light, adequate panel elevation and useful spacing; a crowded or shaded roof can reduce the benefit.
Related product
 | Solar Panels Solar Panel 530 Watt Bi-Facial Mono Perc The 530 Watt Bi-Facial Mono PERC Solar Panel is a high-efficiency solar module designed for residential, commercial, and large-scale solar... View product → |
Keywords
